RPMTEC Product
Welcome to RPMTEC Enterprises
Premium-quality genuine products directly from our source
Wide range of Semiconductor manufacturing consumables
Product we supply
We offer a wide range of premium-quality genuine products and consumables that add value to your manufacturing needs and meet your manufacturing and application-specific requirements with the highest standards of quality, reliability, and cost-effective solutions.
We supply high quality genuine consumable products
- Loctite
- Silicone Adhesive
- RTV
High Quality products – Call us and learn more about exceptional savings on our products.
low-cost manufacturing solution is our quality solutions
” RPMTEC is pioneer in providing superior quality semiconductor equipment in the Semiconductor Industry for Silicon Wafer, IC, MEMS, LED, Power devices and PCBA manufacturing, We are committed to deliver manufacturing technical solutions with significant cost savings on your semiconductor manufacturing equipment and wastewater treatment system needs.”
Rubber Pick Up Tools
Premium-quality Die attach pick up tool made with standard rubber tips uses NBR (Nitrile Butadiene Rubber) that can reach up to 250°C custom-design for sensitive MEMS/ICS surface dies.
High Temperature Pick Up Tools
Vespel is a high-performance polyimide-based thermoplastic material, it is wear and chemical resistant pick up tool while minimizing Die surface contact damage. Vespel SP-1 & SP-21 offer max working temperature from 300°C up to 400 °C intermittently.
Carbide Pick Up Tools
The 85-82HRC material carbide pick up tool is excellent for sorting processes, with a max working temperature of up to 2000 °C. polished to achieve a mirror surface finish that makes the surface extremely flat for maximum contact area applications.
Epoxy Dispensing and Stamping Tool
We supply wide range of custom-design dispensing tool nozzle pattern and stamping tool for today complex die dispensing requirement.
Ejector Pin Holder/Pepper Pots
We offer Ejector Needle/Holder and Pepper Pot standard configuration and custom-design to accommodate a wide range of die sizes and die bonding equipment. We supply a variety of hardest to softest material design for the sensitivity of the application.
Wire pull test hook
We provide the most precise, custom-designed wire pull tester hook, capable of accommodating very small wire loop pitch ranges, Our wire pull test hook can handle 0.8 mil up to 10 mil wire diameter and is standard configured for different wire pull tester machine types (Dage/ Royce/XYZ/7200)
Wire Bonder Electronic Flame Off Wands EFO
Our Electronic Flame Off Wands (EFO Wands) made with high purity platinum (99.95%) for optimum conductivity abd deliver consistency electronic flame off (the ball formation EFO) the first process step in the wire-ball bonding cycle that has a direct impact on the bonding strength and stability.
Bond and Die Shear Tools
We provide the most precise, custom-designed shear tools for your bond shear and die shear testing applications made with high-grade carbide material with part accuracy up to 5µm ~ 20µm face width.
SMD Packing Material
Applications
We provides packaging material for various SMD electronic components, such as inductor, connector, IC, resistance, capacitor, switch, fuse, transformer, shield, LED, etc. We have more than 3000 carrier tape molding tools in stock to support and help customers to save the molding expenses.
SMD component packaging
Carrier Tape
Characteristics of carrier tape:
- Our carrier tape adopts 8-88mm PS PET PC.
- Available in both conductive and non-conductive materials.(anti-static/non-antistatic)
- Color: black/transparent
- Adequate stock of off-the-shelf molds for conventional common components
- We provide custom-design carrier tape based to your product requirements that meets EIA-481 criteria.
- Applicable to various SMD components, such as inductor, connector, IC, resistance, capacitor, switch, fuse, transformer, shield, LED, etc.
SMD component packaging
Cover Tape
Our cover tape is made by eco-friendly anti-static material, available in self-adhesion and heat-seal types. The self-adhesion tape comes in transparent and dark brown colors. The heat-seal tape is optional in transparent and translucent (foggy color).
- Carrier Tape (mm)
- Cover Tape (mm)
SMD component packaging
Plastic Reel
RPMTEC-JDL plastic reel adopts eco-friendly PS anti-static material and comes in blue, black and white.
Size:
- Flange diameter: 178mm/330mm/380mm
- Arbor hole diameter: 60mm/100mm/150mm/180mm
- Reel width: 8-72mm
- Above sizes can be freely matched to your demands.
Winding wire
We supply wide variety of professionally manufactured high-end copper winding wires, magnetic wire and litz wire custom-made for your need.
Wire coated enameled stranded wire
Silk-covered wire is an insulated wire in which a single enameled wire or enameled wire strand is wrapped with one or more layers of insulating fibers (nylon, polyester fiber, natural silk, self-adhesive silk, etc.).
Enameled stranded wire
Enameled stranded wire, also called Litz wire, consists of a number of single enameled wires, insulated wires twisted together with a certain structure and specific lay length.
Film coated enameled stranded wire
Film-covered wire refers to a reinforced insulated stranded wire that is wrapped with one or more layers of insulating film outside the ordinary stranded wire at a certain overlap rate. It has the advantages of good voltage resistance and high mechanical strength. The product’s working voltage is up to 1000Vrms. The working frequency can reach 500kHz, which can be widely used in various high-frequency and high-voltage electric energy conversion equipment.
Film coated flat wire
Film-coated flat wire is a film-coated stranded wire that is square or flat on the basis of ordinary film-coated stranded wire through rolling process. In addition to the performance characteristics of ordinary film-coated wire, it can also reduce the gap between transformer windings. , So that the transformer obtains a higher fill factor.
Reflow over conveyor Oil and Grease
High Temperature Oil
RPMTEC-Provide high temperature grease and lubrication oil for our SMT Reflow and Oven automation equipment.
Size:
- Fit lube series
- Castrol oil series
- Mobil Oil series
For your manufacturing solutions
high-quality products and services
Our Customer’s (relationships) are the greatest asset of our company next to our customer-focused employees and one of the core of our business. We are not just selling our equipment and reliable products but we also provide our manufacturing technical guidance and expertise to achieve high level of manufacturing efficiency and process improvement.
Call Us for your equipment reservation -
- +63 918-660-9159
- sales@rpmtecenterprises.com
Call or email us now for instant customer service
Probe Pogo Pins
High-qualify Probe pogo pin specializing in the production of test probes
RM-061 ICT/FCT PROBES
RM-061 probe is designed and developed with professional standards.
RM-078 ICT/FCT PROBES
RM-078 ICT has a wide range of use, high measurement accuracy, and clear indication of detected problems
RM-102 ICT/FCT PROBES
RM-102 ICT has a wide range application, high measurement accuracy, and clear indication of detected problems. Can considerably increase production efficiency while lowering costs.
RM-137 ICT/FCT PROBES
RM-137 ICT has wide application range, high measurement accuracy and clear indication of detected problems. It is a standard test means. Even workers with ordinary electronic technology can easily deal with problematic PCBA.
BGA double head PROBES
Probe for solder ball array packaging, an array solder ball at the bottom of the package substrate as the I / O circuit and interconnection to detect read-write programming.
RM - 020 series
RM - 063 series
RM - 064 series
RM - 080 series
RM - 081 series
RM - 083 series
RPMTEC ENTERPRISES – Committed to delivering manufacturing technical solution with significant cost savings for your semiconductor manufacturing equipment and wastewater treatment needs.
get in touch
- General Tinio, Kapt Pepe Phase II, Cabanatuan City, Nueva Ecija, Philippines 3100
- Villa real Street, Manuyo I, Las Piñas City, Philippines 1740.
- 63-918-660-9159
- 63-926-388-2351
- sales@rpmtecenterprises.com